Airhead Reference › The book › Carburetion — Bing CV › R100 ('81+ base)
Carburetion — Bing CV · Factory jetting — 40 mm (Type 94) · R100 twin-shock

R100 ('81+ base)

▲ Safety-critical — over-torque-intolerant. Do not exceed the figure.
Carb #
94/40/123–124
Main jet
160
Needle jet
2.66
Jet needle / clip · 371 · pos 2
Slide 913. Later than the 1981 model-year sheet, which specifies 94/40/111–112 with a 160 main for the whole range — see the row above. Treat 123/124 as a post-1981 or market variant and confirm the flange stamp.

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in Factory jetting — 40 mm (Type 94) · R100 twin-shock