Airhead Reference › The book › Carburetion — Bing CV › R60/7
Carburetion — Bing CV · Factory jetting — 26 mm Bing slide carburettor · R60/7

R60/7

▲ Safety-critical — over-torque-intolerant. Do not exceed the figure.
Carb #
1/26/123 (L) · 1/26/124 (R)
Main jet
140
Needle jet
2.68 with accelerator pump
Jet needle / position · needle 4 · position 2
Barrel 26 mm. Idle jet 40; no idle air jet — the only carburettor in the /7 range without one. Because the slide is cable-operated rather than vacuum-operated, the CV diagnostic logic in the rest of this chapter does not transfer: a slide carb obeys your wrist.

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.