Airhead Reference › The book › Cylinders & Pistons › Ovality / taper max
Cylinders & Pistons · Bores & Pistons — 1000cc

Ovality / taper max

▲ Safety-critical — over-torque-intolerant. Do not exceed the figure.
Metric
0.010 / 0.020 mm
Inch
.0004 / .0008"
Wear limit
beyond = renew
Applies · R100

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in Bores & Pistons — 1000cc