Airhead Reference › The book › Torque Specifications › Centre stand
Torque Specifications · 46 · Frame

Centre stand

▲ Safety-critical — over-torque-intolerant. Do not exceed the figure.
ft-lb
32–35
Nm
43–48
Prep
—
Applies · /5–’84 twin-shock
BMW-WSM7 §46 Factory 12.77: centre-stand securing bolts 43–48 N·m (32–35 ft-lb). The 25–26 ft-lb previously printed here traced to secondary tables and was about 25% low — these bolts loosen, and a stand that drops at speed is not a small failure. The ’85+ monolever figure remains unverified here.

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in 46 · Frame