Airhead Reference › The book › Torque Specifications › Output flange → U-joint (4)
Torque Specifications · 21–23 · Clutch & Transmission

Output flange → U-joint (4)

▲ Safety-critical — over-torque-intolerant. Do not exceed the figure.
ft-lb
25–29
Nm
34–39
Prep
Blue Loctite, NO lockwashers
Applies · All
Thread · M8×1
Short bolts only. Adapter tool at 90°.

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in 21–23 · Clutch & Transmission