Airhead Reference › The book › Torque Specifications › Swing arm 27 mm locknuts
Torque Specifications · 26 · Driveshaft & Swing Arm

Swing arm 27 mm locknuts

ft-lb
74–88
Nm
100 + 20
Prep
—
Applies · Twin-shock · 3.82
Thread · M20×1.5
BMW-RA382 Factory 3.82: 100+20 N·m, and the pivot pins themselves are set to a 10+2 N·m preload first — a two-stage procedure this guide did not previously mention. Modified thin-wall socket.

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in 26 · Driveshaft & Swing Arm