Airhead Reference › The book › Transmission & Final Drive › Bearings
Transmission & Final Drive · Gearbox shimming — the heart of a rebuild

Bearings

Value
C3 clearance
Applies · all positions unless noted
Case heated to ~100 °C for shaft removal/install. Cover bolts: 72 INCH-lb (see Torque §21–23).

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in Gearbox shimming — the heart of a rebuild