Airhead Reference › The book › Upgrades & Modifications › Button type
Upgrades & Modifications · Motogadget m.button — one-wire handlebar bus

Button type

▲ Safety-critical — over-torque-intolerant. Do not exceed the figure.
Value
momentary, switching to ground
Applies · any pushbutton
Same ground-switched logic as the m.unit itself. Works with any momentary button — Motogadget's mo.switch (CNC billet, IP65, 22.2 mm & 1" bars, 2- or 3-button) is the matched hardware, but bar-end micro-buttons work too. m.unit handles the logic: press-again signal cancel, one-button Lo/Hi.

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in Motogadget m.button — one-wire handlebar bus