Airhead Reference › The book › Torque Specifications › Clutch bolts (6) — small airhead
Torque Specifications · 11 · Engine

Clutch bolts (6) — small airhead

▲ Safety-critical — over-torque-intolerant. Do not exceed the figure.
ft-lb
7.3 (88 in-lb)
Nm
10
Prep
Blue Loctite, new star washers
Applies · R45 / R65, old-style clutch
Roughly half the large-airhead figure. Using the 14.5–16 row here is ~2× spec.

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in 11 · Engine