Airhead Reference › The book › Torque Specifications › Rear drive → driveshaft housing (4)
Torque Specifications · 33 · Rear Drive & Shocks

Rear drive → driveshaft housing (4)

ft-lb
35
Nm
47
Prep
Paper gasket, dry
Applies · Twin-shock
BMW-WSM7 §33 1981 sheet: “twelve-sided nut for final drive housing / swinging fork mounting, 47 N·m (35)” — the 12.77 sheet’s lower “nuts on drive housing” line is the cover nuts (18 N·m), a different fastener. Mono models: no gasket, Loctite retainer instead.

This is the book's general row. In the book, pick your model and year and this figure resolves to your machine, with the one-page torque sheet, the job pages and the printable booklet.

Open in the book
Report an error in this figure

If this figure disagrees with your manual, say which manual and which page. Every report is checked against the source before anything in the book changes.

Also in 33 · Rear Drive & Shocks